3ton Induction melting furnace
(aluminum shell mechanical drive）
3t energy-saving medium frequency constant induction furnace
(aluminum shell mechanical drive)
1. Model number GW-3-2500/0.5J：rated capacity of furnace 3.0，rated power of medium frequency supply 2500KW。
2. Complete set supply range：furnace body 2set，furnace dumping device2 set， medium frequency power supply cabinet 1set,water cooling cable (4.5m) 4set,,capacitor cabinet (open type) 1set, water bank of furnace body 1set, water bank of supply cabinet 1set, water bank of capacitor cabinet 1set, Furnace dump transmission control box desk 1set, crucible mold 1set. Spare parts of equipment: master control board 1piece, SCR KK1piece, SCR KP 1piece.
3.Technical specification：3-phase incoming voltage of variable-frequency supply source 1000V, output voltage of medium frequency supply 1650V. Rated power 2500KW, furnace body outside diameter Φ1800,inside Φ1740, height 1980. Inductor inner diameter Φ1020 pillar height 1500..Fit out components：silicon-controlled rectifier (SCR) for KP2000A／3500V,6pcs ；KK tube 2500A／2500V,2pcs ， (connecting in series-parallel) totally 8pcs.Cabinet 1000V/2500A equipped with low-voltage distribution universal circuit breaker. Total capacity of compensate capacitor 28000kilovar. Furnace tilting type: Reducer drive with 631-reducer drive，trustiness、facility.All parts with Chinese top brand.
4.Master control board：The control circuit used one single master control board, it designed to be whole, and reduced connecting line greatly, fixed reliability, so avoided safe failure. This control circuit board is high degree of integration, the α angle automatic adjusted especially, that let power output of the equipment always was on constant condition, and electric power can be saved over 3% in comparison with same kind product. Safe start-up and automatic frequency-sweep.
5. Customer service: Free debugging (at home), all the costs of seller’s experts go and work at abroad for return air tickets, accommodation and meals, will be borne by the buyer. If need Debugging, the buyer shall compensate the experts at USD 150 per day for delaying time. The seller should be responsible for the scene testing; After normal melting the seller should be responsible to guarantee repair or change of the faulty components in 6 months, such as master control board, reactor, compensate capacitor、hydraulic device、breaker、and furnace shell (except for lining break through, stoppage or shortage of cooling water supply for components).
Team of payment：Buyer pay 40% of full value in advance, the buyer pay 60% of full value before shipment.